Ready stock and bulk made-to-order: Buy individual molds whenever inventory is available. When ready stock is sold out, orders remain available with a 10-mold minimum. Made-to-order production typically takes 1–2 weeks before shipping.
Produce very small cube-shaped gummies and confectionery pieces with this high-density commercial mold. The RS1-27 catalog specifies a nominal 0.13mL water capacity per cavity, 5 × 5 × 5mm cavity dimensions, and a 190 × 190 × 8mm overall mold size. The catalog tray image shows a 25 × 25 layout for 625 cavities, giving a nominal total water capacity of approximately 81.25mL per mold.
Product specifications
- Shape: Micro cube
- Cavity volume: 0.13mL water capacity per cavity
- Gummy capacity: 0.16mL catalog capacity per cavity
- Cavity dimensions: 5 × 5 × 5mm
- Cavity layout: 25 × 25
- Cavity count: 625
- Total nominal water capacity: 81.25mL
- Mold dimensions: 190 × 190 × 8mm
- Material: Silicone
Commercial production output
Each mold produces up to 625 micro cube pieces per cycle. A 10-mold made-to-order quantity provides capacity for up to 6,250 pieces per production cycle.
Important volume and weight note
The 0.13mL figure is the manufacturer catalog water capacity. Finished piece weight and actual fill volume depend on formulation, density, fill level, and processing. Test your recipe before setting a labeled piece weight or dosage.
Filling and production methods
The high-density micro-cavity layout can be used for controlled hand filling, pour-and-scrape production, or compatible depositing systems when nozzle size, spacing, shot volume, alignment, and tray support are verified for your equipment.
Frequently asked questions
How many pieces does one mold make?
Up to 625 micro cube pieces per cycle.
How small is each cavity?
Each cavity measures 5 × 5 × 5mm and has a nominal 0.13mL water capacity.
Can I order fewer than 10 molds?
Yes, whenever ready-stock inventory is available. If inventory is sold out, the made-to-order minimum is 10 molds.